---

Article by Robert Blume

Micro ATX (or ?ATX) is a form aspect motherboard available in diverse sizes from 9.6′ x 9.6′to 6.75′ x 6.75′. The motherboard supports Intel, Via, and AMD chipsets or CPUs. The motherboard was released in 1997 and it was designed as a replacement for ATX form factor motherboards. Some of the positive aspects of this motherboard more than the ATX form aspect motherboards it replaced consist of the smaller and much more compact size, theintegrated devices which signifies fewer expansion slots, lower chassis cost, lower consumption of power, and a number of other people. ATX form element motherboards were developed in 1995 by Intel. microATX is backward-compatible with the original ATX. The mounting points are subsets of those used by ATX motherboards and the I/O panels are also identical. This implies microATX motherboards can fit in the circumstances of ATX motherboards. ATX motherboards and microATX motherboards also share power connectors. The two boards also share chipsets which are southbridges or northbridges. Nevertheless, cases for microATX are typically smaller. The common ATX motherboard size is 25% longer than a microATX motherboard at 12′ wide x 9.6′deep.

Modern ATX form aspect motherboards come with far more than five PCI/ PCI-Express expansion slots even though microATX form aspect motherboards only come with four as the maximum. This is the reason why microATX motherboards come with integrated peripherals such as integrated graphics cards. An example of this is Asus A8N-VM CSM motherboard which comes with an onboard GeForce 6 graphics card, AC’97 audio card, and a gigabit Ethernet adapter. The power supply has 3 principal outputs and these are +three.3 V, +five V and +12 V. You could also get supplies with 5 VSB (for standby) and ?12 V (for low power). microATX situations support 6 SATA devices and 4legacy IDE drives only. If you so wish, you could maximize the capability of these motherboards by setting them on ATX situations. Note that some microATX circumstances that use power supplies that do not havestandard dimensions will call for LP PCI cards.

Motherboards getting the heart and soul for creating a method. It is the component that connects all the other parts together and make sure they run smoothly. As such, choosing the greatest gaming motherboard is the most important activity that you need to do when constructing a gaming laptop or computer. This post will teach you how to choose the best gaming motherboard.

Choose which type of CPU to use

This might appear irrelevant to picking a motherboard. In actual truth, this is the most essential factor you require to do before selecting a motherboard. The reason getting that the sort of CPU will decide the kind of motherboard you need to have. For example, if you select an Intel CPU, then you have to get the socket 775 motherboard or else the CPU won’t fit into the motherboard. Deciding on the sort of CPU will help you to make a much better selection when selecting the finest gaming motherboard.

Decide if the motherboard supports the sort of CPU you have chosen

As mentioned before, if you are using an Intel CPU, you have to get a socket 775 motherboard whereas an AMD CPU requires a socket AM2 motherboard. In addition, some of the older socket 775 motherboards do not help dual core processors (even even though they use the identical socket) or even quad-core processors. Check out the manufacturer’s web site to get confirmation prior to you purchase the motherboard.

Asus Motherboards

ASUS ROG Maximus III Formula.

ASUS’ Republic of Gamers series motherboards have been the pinnacle of every series and provided that additional one thing that was not identified with regularity on the non ROG models. The prime focus on X58 based systems was the cost of entry into the club of ownership. Intel has realized it left a considerable portion of the public to its competitor so the company has now rectified this mistake with the introduction of the P55 Express chipset and socket 1156 i5 and i7 processors to bring the price of an Intel high performance method down to a comfy acquire point. Along with this introduction ASUS has released a significant number of P55 based motherboards to fit every price point from mild to extreme. The Maximus III Formula is ASUS’ latest ROG motherboard that is built upon the P55 chipset. The Maximus III Formula is built employing the newest design philosophy from ASUS known as Extreme design. This idea is meant to supply all the rewards that you may possibly or might not see such as diodes used to prevent static discharges when plugging in an external device from killing your hardware. Solid capacitors for extended life, Stack Cool 3+ technology to reduce the operating temperature of vital components, dual 2oz copper layers to aid with efficiency and board cooling. All issues that fall within the three design objectives of Safety, Reliability and Efficiency. As if that is enough, ASUS has included a big suite of software program tools that bring added functionality.

Rampage III Black Edition.

Bigfoot’s Killer E2100 platform is based on the company’s Killer 2100 gaming network card which uses a devoted network processing unit. The tech also attributes Bigfoot’s Game Networking DNA software that can classify and accelerates on the internet game targeted traffic. Needless to say, Bigfoot’s Killer tech must assist defeat the hungry lag monster in the course of the ultimate frag-fest or a enormous boss raid on the web.

Friday Bigfoot added that the ASUS ROG Rampage III Black Edition motherboard was created around feedback received from the Computer gaming community. “Powered by Bigfoot Networks’ new Killer E2100 networking platform and a host of other gaming-centric features, the ROG Rampage III Black Edition motherboard combines innovative style and technical intelligence to make the Pc gaming encounter a lot more rewarding and accessible,” the company said.

---

I have a big green Alienware desktop pc that I bought a couple of years ago. Every thing just began to fall apart on it and now I am searching for a motherboard that is for Intel athlon and it also needs slots for DDR Ram and AGP slot for video. Supposedly these parts are challenging to uncover due to the fact they aren’t readily sold any longer. If any person has any concepts of where I can discover these parts I drastically appreciate it!

Answer by hellotman16
AMD athlon, socket A.

Go to newegg.com or tigerdirect.com.

If you know the precise motherboard, go to ebay and search for the model quantity.

Cheers

---

A neighbor’s son came more than with this laptop & wanted to know if I could get the USB port operating.

Checked Device Manager & there is NO listing of USB, so I did a Locate New Hardware & it located absolutely nothing.

Checked Toshiba’s site for info andor drivers, nothing was mentioned about USB supportdriver…

I did download & install Every update obtainable for the laptop, but still no USB is listed & the USB port does not recognize something I plug into it

I also did a “Add New Hardware Manually” & selected “Infrared” then chosen “built-in laptop device” then I selected “Toshiba” & Windows loaded the software program.

NOTE: This laptop has Infrared & USB port on 1 module that plugs INTO the motherboard.

Anyway, I rebooted & got a popup message “PCI Universal Serial Port located, click subsequent to install driver” Which I did but it did NOT locate a driver. I tried Every single Folder & Every single SubDirectory but still “No driver found”

Now the Infrared shows as operating but Nevertheless NO USB PORT!

Answer by dze
infrared has nothing to do with it … im not understanding ur note about the module though … if its a pcmcia card then u require the pcmcia driver for the laptop plus the driver specific to the card …

---

Okay….1 of my buddies sold me a GIGABYTE motherboard…which the model is “7DXR+”……….and he threw in a processor in with it and wasnt positive if the motherboard could manage it (its an AMD ATHLON XP 2800+, we are positive it is that) and i looked up the motherboard on the GIGABYTE internet site, and it says that the highest processor with the most up-to-date BIOS update that it can manage..is an AMD ATHLON XP 2600……and also …when it boots up…it will say that its clocking @ ~1250 mhz………..so what im asking yourself is…can i more than-ride this difficulty somehow by producing it function with the 2800 without having getting to acquire a new motherboard? and my other question would be ,,,is it truly clocking at 1250mhz when its a 2.0ghz????

Answer by Just_curious
Bios dominates every thing. If the bios does not supports your processor. The finest you will get is the under performing processor sitting on top. Or worse, you will crash from time to time.

Check and see if a person on craigslist willing to trade your cpu with you.

---

I brought back a laptop or computer that I had repaired since the repair wasn’t productive (it was still crashing the way it had prior to it was “repaired”), and a couple of months later they mentioned it was now working and that I owed them yet another $ 900.

I was shocked, because I thought they would make very good on their 1st repair that hadn’t worked, but I was also shocked since they didn’t tell me that it would expense any a lot more funds at all. They supplied to cut the charge down to $ 500, as a compromise, but after the 1st repair cost of $ 450, I saw this total repair as a ridiculous $ 950 for the work of basically just replacing a motherboard and CPU fan.

Did I have any legal rights to an estimate prior to they did the perform? If I had identified it was going to cost anywhere near that significantly I would have cut my losses and sold the machine for parts.

P.S. I am in NY, NY if that impacts the laws applicable.

Answer by ITGuy
I’d say you do not owe them a issue. If the problem persisted right after the initial repair and they charged you for it the 1st time, then you have already paid to have your issue resolved. I would not pay them and make them go following you. You have a very good case.
I worked in pc/printer repair for years and by no means re-charged due to the fact it took me two tries to fix a machine.

They absolutely ought to have told you that there would be further charges. I would also report them to the BBB, and if you identified them by way of Craigslist, I’d go on there and put up warnings about this scammer.

Answer by cajunspike1959
Seriously, talk to a lawyer.

---

I sent my Xbox in to Radioshack so they can “repair” it. They sent me back an xbox that was entirely different. It had a various disk drive, tough drive, and casing/ serial number. The casing was extremely dirty when I received it, and the original box that I sent it in was distinct than the 1 that I recieved. The controller, headset, and Ethernet cable were not included and I really had to wait yet another week for these to arrive. I sent it back to them and they sent me the exact identical one particular and they told me that they had to adjust the motherboard since it was fried. He stated that they also had to modify the casing and disc drive supposedly. Does the casing and the disc drive have to be changed in order to alter the motherboard? I think that they are lying to me since they possibly couldn’t fix mine and gave me an additional refurbished 1 so they didn’t have to replace it.

Answer by Hacked Off
I wouldn’t attempt them once more.

---

I am thinking about buying the above-mentioned motherboard for a new “upgrade” personal computer from my regular Socket A system that I have now, and I would just like to know about this board efficiency-wise from an skilled hands-on user of the same.

Answer by Mayank Agarwal
y dont u guys go for gud ol’ INTEL?

---

Article by sunny

Abit motherboard drivers are a need to, if you feel that your computer’s performance is not up to the market. The name Abit has turn out to be a household name when it comes to motherboard brands and has been in existence for fairly some time now.With these motherboard drivers, you can experience enhanced computing experience. Your computer will no longer be painfully slow and error prone. These motherboard drivers are nothing but computer software programs that communicate with the hardware that makes up your Computer. These software program programs will tell your computer’s operating method how the specific hardware device operates.

Installing Abit motherboard drivers is an easy process. The 1st issue that you require to guarantee is that you have selected the proper driver from the wide range of drivers that is on offer you from Abit. Your selection will be dictated by the operating system in your pc. As soon as you have made certain that you are having the appropriate motherboard driver, you can then confidently go ahead with the installation method.

Abit motherboard drivers generally come with a user manual and a quick installation guide. When you insert the installation CD inside your computer’s CD tray, then all that you need to have to do is to adhere to the directions that you see on the computer’s monitor.1 require not be an professional in computers to install the computer software.You require to preserve following the prompts till the installation is completed.The entire installation approach will hardly take a handful of minutes.

Abit motherboard drivers come with a host of advanced functions. One particular such feature is that it supports Dolby surround sound, ensuring enhanced sound top quality. Similarly, you will also encounter superior picture good quality once the software program program is installed. The speed of your personal computer will also go up after you install the driver.You will surely uncover an general improvement in the efficiency of your pc once you install the driver.

---

Article by Paul Adams

One particular of the worst things that can happen to your laptop is the motherboard failure frequently resulting into laptop motherboard repair. If the motherboard is damaged and is beyond repair, you would undoubtedly need to think about acquiring a new laptop. This is of course needed as the motherboard of a laptop is extremely costly and not covered by a warranty, so the better choice would be to buy a new laptop.
But before you reach to the conclusion, thoroughly assess the motherboard damage. For you need to decide between two possibilities laptop motherboard repair vs. a new laptop.
Look in for these tell tale signs of motherboard failure
1) You have switched on the pc becoming indicated by the light and fan also begins to spin. But there is complete black- out on the personal computer screen with the difficult drive not operating inside 10- 15 sec.
two) The initial start up functions appear like indicative light, fan and tough drive sound, but disappears soon after a while i.e. 5 – three mins.
three) A high pitched sound comes from the laptop when you press the “on” button.
four) Last a single can be that even when you have switched on the computer nothing takes place.

Cause of Mother Board Failure
There are numerous factors why a laptop’s motherboard would fail. But some typical and typically unlooked corners contain
1) Electric and voltage fluctuations
two) Dust particles, smoke, laptops age
three) Fan failure usually causing more than heating concerns
4) Crash or physical damage
Exceptions to be looked when checking for laptop motherboard harm
Even the signs of motherboard failure mentioned above wants to be looked into, there are some exceptions to them which include
1. The black screen could be an indication of a attainable back light dilemma. In-in between the hinges there is button as the on/off switch for the laptop’s back light. This buttons automatically get switched off when the lid is closed. Even so, sometimes it gets stuck. As a result first pull the laptop’s lid back and forth, if it is still the same then take a pin, discover the switch and gently tap it. If even this doesn’t function, attainable you want a laptop motherboard repair.
two. If your laptops get switched on for a handful of seconds and then dies out, it could be due to battery being exhausted. Very first connected to the power outlet and then switch it on. Also check for connection cables, if it is still not functions there could be two causes. First your adapter may have been damaged, get it checked. If that’s not the case then the achievable failure could indicate a laptop motherboard repair.
3. Frequently re- setting the RAM and CMOS or updating the BIOS could save you from motherboard laptop repair.

As an suggestions – if you are no professional in laptop hardware, but you know your motherboard has failed- Usually go for a expert Motherboard Laptop Repair.

---

My motherboard is a “P5LP-LE (Leonite) motherboard”
Motherboard supports the following processor upgrades:
Core 2 Duo E6x00
Core 2 Duo E4x00
Pentium D 9×0 Dual Core
Pentium D 8xx Dual Core
Pentium four 6×1 series
Celeron D 3xx series

Can someone give me a notion of which one to go for.
Thanks in advance

Answer by Andrew S
Those are basically listed in order of performance currently, fastest very first.