ASRock Socket AM3/AMD 880G/Hybrid CrossFireX/A&V&GbE/MATX Motherboard 880GM-LE
- CPU: Socket AM3 Support AMD Phenom II X6/X4/X3/X2 (except 920 /940) /Athlon II X4 /X3 /X2 /Sempron processors Six-Core CPU Ready Supports Hyper-Transport three. Technologies FSB 5.two GT/s Chipset: AMD 880G & SB710
- Memory: 2x 240pin DDR3-1800(OC)/1600(OC)/1333/1066/800 DIMMs, Dual Channel, Non-ECC/Un-buffered, Max Capacity Upto 8 GB
- Slots: 1x PCI-Express 2. x16 Slots(Supports ATI Hybrid CrossFireX Technology) 1x PCI-Express 2. x1 Slot 2x PCI Slots IDE/SATA: 1x ATA133 Channel 6x SATA2 Ports, Support RAID , 1, ten and JBOD
- Video: Integrated AMD Radeon HD4250 Graphics,w/512MB shared memory Supports Full HD 1080p playback LAN: Realtek RTL8111DL PCI-E x1 Gigabit Ethernet Controller
- Ports: 12x USB 2. Ports (6 rear, 6 by headers) 2x PS/2 Ports 1x VGA Port 1x DVI-D Port 1x RJ45 LAN Port Audio I/O Jack Power Connector: 1x 24pin primary power, 1x 4pin CPU power
ASRock 880GM-LE Socket AM3/AMD 880G/Hybrid CrossFireX/A&V&GbE/MATX Motherboard

If you know anything about this concern, any support is greatly appreciated.
Lately I produced a personal computer custom-produced, with the support of a family members friend who is a university student studying technology, and has some prior encounter in the construction of computers. I myself have little experience other than this. We made the pc with relative ease in a matter of 2 or so hours, but as soon as construction was completed and we decided to see if it would function, the personal computer skilled some anomalies:
1. This is personally observed and I’m not saying it’s a problem, but the personal computer would start off operating right after getting the button pushed (fans spinning, lights on) for a matter of seconds, then it would turn off, and then turn back on and indefinitely run from then on. I’m only talking about this simply because I am purely unsure of its relevance.
2. The much more evident, and apparent issue is that of the visual. The hardware specifications are mentioned beneath for reference, but now is just the observed issues. Please be conscious that I have tried to switch from the plugs in the graphics card and the plugs in the region that is near the motherboard (I’m not aware if it plugs into the motherboard itself, but anyway). The graphics card only has 2 accessible inputs, each of which seem to be DVI inputs. I have a cable that came with the monitor that is a DVI to HDMI slot, and it is able to have that as an input on the back of it, so logic would have that there would be no reason for it to not operate.
In addition I’ve tried to plug into the graphics card‘s second DVI slot, and also into the tower’s one that is close to the motherboard.
Not only that, I have tried employing VGA inputs as properly. My monitor has a VGA slot and as does my tower.
Note that the only reason I do not know where the plugs close to the motherboard go to is because I was distracted at this point.
I have also tried altering the settings on my monitor from HDMI to VGA with both cables while the laptop or computer was running and nevertheless absolutely nothing would take place.
Also, to stay away from some confusion, the student that helped me has had copius amounts of perform to do and therefore hasn’t been able to aid at this point, so that is why some of my information is novice.
I have talked to my IT teacher at school about this a whilst back and from the data he gathered something about “the bus cables may possibly not be connected in the right locations internally”, which is hard for me to approach right after last dealing that unit of IT years ago.
The second person whom I operate with at a job, is a student studying Aviation at university and seemed to have a couple of feasible concerns to pose. He recommended it was either the cables internally, or that the screen or graphics card might be not functioning.
Until this point no additional issues of relevance come to mind.
What I will do as it could prove some assist to clear up any issues is this:
Monitor: “ASUS ML239H 23″ 5ms Full HD IPS Panel HDMI LED Monitor”
Motherboard: “Asus P8Z68-V-M PRO Motherboard, Socket 1155, mATX”
Video Card: “EVGA GeForce GTX 570 1280MB GDDR5 PCIE, HDMI, Dual DVI,!”
RAM: “G.SKILL RIPJAWS X F3-12800CL9D-8GBXL 8GB 2x4GB DDR3 1600MHZ Desktop RAM”
Power Supply: “HX 750W Corsair Professional Series”
CPU: “Intel inside corei7 – intel core i7 processor Unlocked & Unleashed – i7 2600K LGA1155″
Hopefully that’s all the relevant stuff, but I have a high finish Noctua heatsink for the record, just can’t don’t forget the name.
PS if you’re going to suggest checking out the cables, if feasible specify where to appear, and if you can try to discover as numerous alternatives as you can please.
PPS I feel it is relevant to mention this:
I got the graphics card from:
http://myworld.ebay.com.au/tasperformancepc
The card was in utilized condition and had no noticeable description informing me of disfunctionality.
It really is not out of the question that the graphics card could have some troubles with functionality but I do want to try to explore other places of possibility in detail also.
Thanks alot to any thinking of helping.
Answer by Jimmy
I had a similar encounter with 1 of my computers. The motherboard is an Intel DG45ID and the CPU is an E8500. What happens is when I alter a setting in the bios it will do this same thing, sometimes far more than when. It will turn itself off, turn on, turn off then turn on again. Other times it does this cycle just once, turn off and then turn on and it would usually run usually following performing this. I have not had any actual troubles as far as crashing or other unusual points it does. This factor it does is just one thing strange it wants to do. And as long as I do not change any settings in the bios it does not do this. It really is the only personal computer I have ever had that does this. I would just let it do its factor and not worry about it.
Answer by Dave
OK, that was a lot of details. But boiling it down, you have a new build that is not POSTing. To POST, you require a great motherboard, a great power provide and a great CPU. Nothing else. If something else is missing or bad, you will still get POST, but with errors.
Whether or not the video card is excellent or not is irrelevant. But to simplify points, take the video card out till you get this program to POST. With the video card out, you may possibly get error beeps on POST. But if you do, then you will know that your video card is poor (because error beeps would be a step in the proper path!)
Simple checks. Do you have your 24-pin power cable connected to the motherboard? Do you have the 8-pin CPU cable connected to the motherboard? If you have a 4-pin CPU cable on an 8-pin CPU power connection, that’s a dilemma (in spite of what the motherboard owner’s manual may possibly say)
The turning on, off, then back on and staying on is bizarre. I’d be leaning toward negative motherboard if I saw that. Even so, this could be caused by a poor power supply, also. And seeing as most POST difficulties are brought on by bad power supplies…
See if you can borrow a recognized good power provide from one more technique to attempt that.